2SHPCK-BL-5T Two Keg Homebrew Party Kegerator Kit with 5 lb CO2 Tank - Ball Lock

No reviews. Leave a review
$386.31
SKU:
2SHPCK-BALL-5T

Highlights


Two sets of ball lock home brew keg connectors specifically for ball lock kegs

The Kegco 542-2 premium pro series double gauge co2 regulator features air splitter

High strength aluminum allow 5 lb. co2 tank included

Features two picnic faucets with 5 ft. of 3/16 inch I.D. draft beer line

Includes two reconditioned 5 gallon ball lock kegs that have been rinsed and tested for pressurization

If you're tired of dispensing single kegs of beer from hard-to-use hand pumped party pumps, and wish your remaining beer could stay fresh after the party instead of quickly becoming flat and undrinkable? Kegco's Two Keg Homebrew Party Kegerator is the perfect solution! Because it uses a CO2 driven dispense system, you can easily dispense not one but two ball lock kegs full of refreshing cold draft beer, and your keg will stay fresher for longer so you can enjoy your beer long after the party is over. This kit does not use any towers and shanks so there is no installation - you just need a refrigerator large enough to hold two ball lock homebrew kegs. Our kegerator kits use only high-quality commercial-grade parts that have been designed and built to last, so you can feel confident that your beer is in the best of hands.

Pro Series Double Gauge RegulatorTwo Product Pro Series Double Gauge Regulator:
If you want a two product regulator with high end features but do not need to dispense your keg at different pressures, this pro series double gauge regulator with a y-splitter and two independent shut-off valves is perfect for you! It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.


Ball Lock Home Brew Keg Tap Complete SetTwo Complete Sets of Ball Lock Home Brew Keg Taps:
These complete ball lock home brew keg tap sets include both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line.



Party FaucetParty Faucet Assembly:
This is a black plastic party pump squeeze faucet with five feet of black 3/16" I.D. beer line. This is the faucet you see installed on all picnic keg pumps. The beer line attaches to the hose nipple on the liquid out coupler and is held in place by a clamp.




Reconditioned Keg2 Reconditioned Kegs:
Set of (2) - 5 Gallon Used Stainless Steel Ball Lock Soda Kegs. We have rinsed and pressure tested them to hold pressure, however, they are not new and should been cleaned and sanitized before use. New O-Ring Set Included!



  • mount: Party
  • faucet: Two Picnic Faucets
  • keg_coupler: Two Sets of Ball Lock Keg Couplers
  • regulator: Kegco 542-2 Pro Series Dual Gauge CO2 Regulator
  • co2_tank: 5 lb. Aluminum CO2 Tank
  • drip_tray: Not Included
  • cleaning_kit: Not Included
  • faucet_wrench: Not Included
No one has reviewed this product! Write a Review
California Proposition 65 Warning

Related products

Customers also Viewed