The Kegco Home Brew 1/4" MFL Quick Disconnect Set can be used to easily change between commercial and home brew kegs without having to change fittings or cut beer lines. The 1/4" MFL threaded fitting connects to a standard commercial keg coupler with your existing hex nut.
Attach the 1/4" MFL Beer Tailpieces and Chrome Hex Nuts to your beer and air lines. Once the male threaded fittings are attached to your standard commercial keg coupler, simply unscrew the hex nuts from the commercial coupler and attach them to the home brew couplers to switch between kegs. This disconnect set is great for home brewers that also enjoy commercial keg beer.
- 5 Feet of 3/16" ID Beer Hose with a 1/4" MFL Nut
- 5 Feet of 5/16" ID Air Hose with a 1/4" MFL Nut
- (2) 1/4" MFL Beer Tailpiece
- (2) Chrome Hex Nut Beer Coupling Fittings
- (2) Neoprene Beer Coupler Washers
- (1) 3/16 Hose Clamp
- (1) 5/16 Hose Clamp
California Prop. 65 Warning
Warning:This product may contain a substance known to the state of California to cause cancer, birth defects or other reproductive harm.More information