2.5 Gallon Ball Lock Keg - Strap Handle - NSF Approved - Set of 2

No reviews. Leave a review
$204.46
SKU:
2X-AB2G-SH

Highlights


Set of two ball lock home brew kegs that each hold up to 2.5 gallons of homebrew beer, wine, soda, kombucha, or cold brew coffee

Brand new, durable 304 grade stainless steel Cornelius beer kegs are designed for use with ball lock keg couplers

Stainless steel strap handles make these kegs easier to carry

Stainless steel lids fasten tightly to the bodies and include pull ring style pressure release valves

NSF approved kegs are made in Italy and meet NSDA voluntary standards

This set of two 2.5 gallon stainless steel ball lock kegs (also called Pepsi kegs or Cornelius kegs) feature permanently molded rubber bottom skirts, durable stainless steel strap handles, and easy-to-access ball lock fittings that make cleanup hassle-free. The ball lock kegs meet NSDA voluntary standards and are NSF (National Sanitation Foundation) approved. They are an excellent choice for storing and dispensing homebrew beer, wine, soda, kombucha, and even cold-brewed coffee. The stainless steel lids fasten tightly to the bodies and have pull ring style pressure release valves that make it easy to depressurize the kegs. Working pressure must not exceed 130 P.S.I.G.

TANK BODYRack
The tank is created by assembling the upper part (handle top), the lower part (rubber bottom), and the shell (calendared ferrule). The different metallic parts are assembled using round and longitudinal welding. All of the welds on the tank are automatically made following the TIG system in an inert atmosphere without any deposit of material. On top of the tank there is an oval opening (the mouth) that allows the tank to be closed using the lid. On the bottom of the tank there is a sump to enhance the draining off. Printed on the stainless steel external surface of the body there is information about the tank capacity, its identification numbers, and the manufacturer. The lid is made of stainless steel, features a pull ring relief valve, and is finished with a convenient handle.

BODY MATERIALS
The tank model "NC" is made of AISI type 304 stainless steel (1.4301) with NO. 2B mill finish steel sheet, which fulfills ASTM A240 specifications. All interior surfaces are smooth to prevent any possible dirt or contaminants from remaining inside after the keg has been washed and sterilized. Stainless steel does not react to magnetic attraction and its color does not change due to cleaning or sterilization. The body has a thickness of 0.70 mm.

RackPLUGS
The upper part of the tank is equipped with one liquid plug and one gas plug to allow for a quick disconnect from the draft dispense system. The gas plug has an incision on the hexagon and the liquid plug does not have an incision on the hexagon. They are both clearly marked by a stencil.

STEMS
On the top part of the tank there are two welded stems through which the gas tube and the liquid tube are inserted into the tank and on top of which the plugs are fixed.

RackRUBBER COATING
The bottom of the tank is covered with black hot vulcanized natural rubber bonded onto the steel. One stainless steel handle on the top provides easy handling. Four openings in the bottom skirt enhance the drain of water when the keg is upside down. The maximum outside diameter of the rubber part is larger than the outside diameter of the body, allowing the keg to be rolled and minimizing damage by impact.

  • diameter: 8.5"
  • height: 14.5"
  • weight: 5.3 lbs.
  • capacity: 2.5 U.S. Gallons
  • material: 304 Grade Stainless Steel
  • handle: Metal Strap
  • system: Ball Lock
No one has reviewed this product! Write a Review
California Proposition 65 Warning

Related products

Customers also Viewed