Grain Mill with 7 lb Hopper and 2 Rollers

No reviews. Leave a review
$138.86 $111.09
You save $27.77
SKU:
KM7GM-2R

Highlights


The Kegco grain mill is a durable, sturdy mill with an aluminum hopper capable of holding up to 7 lbs of grain and an alloy block frame that hoses two steel rollers on oil-impregnated bronze bushings

The mill comes equipped with a hand crank though it can be easily motorized with a drill with no additional attachments needed

This mill has a crank shift that is capable of driving both clockwise and counter-clockwise because the drive shaft and all axles are integral to the roller

The grain mill's gap is 6" long and easy to adjust by simply loosening the adjustment screws, adjusting the gap to preferred size, and tightening the screws

In order to put the grain mill to use, all you need to supply is a base to set the mill over a grain bin or 5 gallon bucket

The Kegco grain mill is a durable, sturdy mill with an aluminum hopper capable of holding up to 7 lbs of grain. This grain mill features an alloy block frame that hoses two steel rollers on oil-impregnated bronze bushings. The mill comes equipped with a hand crank though it can be easily motorized with a drill. No attachments are needed to use the drill, just stick the drill on and proceed.

This mill has a crank shift that is capable of driving both clockwise and counter-clockwise because the drive shaft and all axles are integral to the roller. The grain mill's gap is 6" long and easy to adjust. Adjusting is as simple as loosening the adjustment screws, adjusting the gap to preferred size, and tightening the screws. In order to put the grain mill to use, all you need to supply is a base to set the mill over a grain bin or 5 gallon bucket.


Features:

  • 6" long adjustable gap
  • Gap spacing adjustment range of .070"
  • Dual eccentric adjusters: 0.100 to 0.025 gap - built from stainless steel for no galling
  • 6 lbs / minute is average throughput
  • 5" x 1.25" diameter steel rollers
  • Fully adjustable mill
  • Crankshaft can be turned clockwise or counterclockwise
  • Durable alloy frame
  • SAE 841 oil impregnated bronze bushings
    No one has reviewed this product! Write a Review
    California Proposition 65 Warning

    Related products

    Customers also Viewed