This Kegco grain mill is perfect for large batches and high efficiency milling as it has three rollers that will crush all of grain twice in one cycle. The initial crush though the fixed gap between the top two rollers, and then the grain passes through the second gap between the drive roller and the adjustable bottom third roller. The first pass will slightly flatten the grain while the second crush breaks apart the grains and loosens the starch with minimal damage to the husk.
This is a durable, sturdy mill with an aluminum hopper capable of holding up to 11 lbs of grain. This grain mill features an alloy block frame that hoses three steel rollers on oil-impregnated bronze bushings. The mill comes equipped with a hand crank though it can be easily motorized with a drill. No attachments are needed to use the drill, just stick the drill on and proceed.
This mill has a crank shift that is capable of driving both clockwise and counter-clockwise because the drive shaft and all axles are integral to the roller. The grain mill's gap is 6" long and easy to adjust. Adjusting is as simple as loosening the adjustment screws, adjusting the gap to preferred size, and tightening the screws. In order to put the grain mill to use, all you need to supply is a base to set the mill over a grain bin or 5 gallon bucket.
California Prop. 65 Warning
Warning:This product may contain a substance known to the state of California to cause cancer, birth defects or other reproductive harm.More information